6 Reasons Why Hard Drives Fail Just like any other gadgets, hard drives may fail
one time or another and when this happens, you might get worried about your data
since this can halt all the operations of your business. Luckily, there are data
recovery companies available and you might call them for your rescue. There are
two major causes of hard disk failures namely: logical and physical. Sometimes,
they can be both and when this happens it can be tricky trying to recover your
data. A data recovery company will help you in extracting data from a faulty
drive and place it onto a mechanically stable hard drive. Below are the most
common failures that are associated with hard drives:
Electrical
failure
The PCB board is charged with the task of communicating,
controlling and coordinating the task of reading and writing data between a
computer and the hard drive. If the PCB on the board of your hard drive gets
damaged, you lose access to the vital data. The damage is caused by power spikes
or surges and this may affect the read-write head circuitry.
Mechanical
failure
This comes as a result of some impact or just wear and tear.
There will be no prior warning that the read-write head, motors or other
internal components are going to be faulty. As such, head crash is the most
dreaded thing when it comes to mechanical failure of a hard drive. Most data
recovery companies have the necessary expertise to recover any data lost but
this will entirely depend on the extent of the damage.
Logical
failure
This is caused by any other type that is not physical in nature
PCB Prototype Manufacturer.
Usually, it can be the easiest or sometimes the most difficult to handle when it
comes to data recovery. However, the task will depend on the circumstances that
lead to the failure and or the extent of the damage. Since some of these
failures are inevitable, you might want to work closely with a reputable data
recovery company and more so, one from your region. Logical failure can include
but not limited to: accidental format, accidental deletion, software bugs, file
corruption and viruses.
Bad platter area
Sometimes, there are
sectors of the hard drives that become inaccessible. The platter surface wears
out with time, and this can cause bad sectors in your drive. Other causes
include manufacturing defects, head crash and tracking errors. Different
techniques are used by the service providers to maximize the yield of
recovery.
Complex failure model
Hard drives may take years and
years before they get faulty. As such, they may not fail just at once. It is a
combination of some of the failure modes that slowly leads to their damage. One
failure mode may trigger the occurrence of another, and as time goes by, the
drive may become inaccessible flex
PCB.
Firmware failure
Firmware is the software that enables
the drive to perform its tasks and it is only accessed by the hard drive
manufacturers. There would be no communication between your computer and the
drive if this software lacked. You can seek after the services of a qualified
and licensed data recovery company to recover all the data lost due to hard
drive failures. You can run a simple online search and you will be good to
go.
Related Links