Effective Solutions With Professional Power Socket Repair
DC appliances in
electronic devices such as laptops link a device to a power source PCB Prototype Manufacturer. Most power
sockets are small devices that are pulled out and pushed in to the power plugs
to transfer energy. Over time, the push-ins and pull-outs will loosen the cord.
Though the power socket is a small device, it is quite costly to buy. However,
professional power socket repair can restore the power device to a working
state.
When the power socket becomes loose or gets broken, a laptop
cannot receive solid power supply. Certain users wiggle the power cord in
certain directions to get power. The worst effect of loose power cords is that
they can damage a computer's motherboard due to excessive heat produced by the
poor electrical connection. The motherboard is the heart of the laptop; its
damage can make the machine un-usable.
The DC jack that brings power to
the laptop is normally soldered on to the computer's motherboard. In most
situations, loose DC jacks can be soldered back to complete the connection.
However, the degree of damage would determine if the laptop needs a new power
socket or just a soldering.
The power source of a notebook computer is an
internal battery charged through an adapter connected to a power socket. When
the socket begins to malfunction, the laptop will barely charge or will
completely not receive power. Some of the most common signs that a power jack is
not functioning include a loose-fitting socket, difficulty in charging the
laptop and incomplete charging. A failing power socket can be repaired by a
competent person at a local PC repair shop.
Causes of laptop power socket
damage
There are certain common factors that are known to cause computer
power socket failure Rigid flex
PCB. These factors include:
-Little or no care for the computer while
on the go. Excessive bumping and knocking of the machine or even not using the
recommended laptop bag can result in many problems which may not just be limited
to the jack. It is recommended that people remove the power cord from the laptop
while travelling. The socket might get twisted or loosened which will make the
power cord not function as required.
-Another reason that may lead to
defunct power socket includes defective components. The power appliance may not
charge a laptop if it has weak joints between the power ports and the
motherboard. The joint can also be weakened through everyday usage which may
cause the power jack to get loose restricting ideal charging.
-Problems
with the power socket may also be caused by wear and aging. For most people who
use notebooks, they have to remove and insert the power cord on an almost every
day basis. Although this falls under normal use, the port may fail over time
because of the constant pushing and pulling. However, notebooks mostly based on
a desk do not experience this problem often.
-Accidents such as tripping
may also damage the power cord.
In any case power socket repair can be
obtained from qualified people who know the internal workings of computer
systems. One advantage of taking a damaged power socket to a professional is
that they have the needed know-how and will repair or if the damage is
irreparable, will advise appropriately on the next course of
action.
Related Links