External Drives Data Recovery
A wide variety of failures can propel severe
external or physical damage to drives and storage media. When the drive is
physically damaged, a greater level of precaution needs to be exercised in order
to ensure that the data is still recoverable.
To clarify your
understanding, external hard drive data recovery means the process of recovering
data from external hard drives like USB or Fire wire when the data is neither
lost nor inaccessible because of some reason or the other. External hard drive
data recovery process comprises the same process followed while trying to
recover some lost files.
Let's take the example of the ICD-ROMs which may
get damaged because their metallic substrate is scratched.
Keep in mind
that hard disks can suffer any of several mechanical failures, such as head
crashes. There can be a case of failed motors so physical damage always causes
at least some minimal case of data loss.
Most physical damaged drives
cannot be repaired by the end users. For example, opening a hard disk in a
normal environment is a complete no-no because the dust would obviously settle
on the surface. If that happens, that could worsen the damage caused to the
platters and complicate the external drive data recovery process even further.
The difficulty is that most users aren't experts nor do they have the
hardware or technical expertise required to make these repairs Rigid flex PCB. So it is best to opt
for data recovery companies to do the job rather than make costlier mistakes
that complicate data recovery processes further.
Most professionals use
Class 100 clean room facilities to protect the media while repairs are being
made. How this is done is discussed herein.
The extracted raw image is
used to reconstruct data that can be used after any repair of the logical damage
is carried out. Once the repair is complete, the files may be in usable form
although its actual recovery may turn out to be very incomplete.
Some
helpful examples of physical recovery procedures include removing a damaged PCB
(printed circuit board) and replacing it with a matching PCB from a healthy
drive. Other good examples comprise changing the original damaged read/write
head assembly with matching parts from a healthy drive, removing the hard disk
platters from the original damaged drive and installing them into a drive that
works fine. As these procedures are technical in nature, it is best that these
are taken care of by professionals and not by untrained persons.
When the
hard drive is physically damaged, remember that any additional access to the
same drive would definitely corrupt data. This would make it much more difficult
to get information back.
Note that if the damaged drive happens to be
the drive containing the operating system, don't consider trying to boot the
drive. But for a desktop, there is less cause for worry as all you must do is
disconnect the boot drive and replace it with a new drive. A tip for you is that
do ensure the drive can accommodate the image of the current drive.
Next,
an operating system can be easily installed on the new drive. You just need to
reconnect the old drive or put it in an external case and connect via USB or
FireWire.
In creating a new primary drive, you would be able to run the
disk imaging software from the new drive. This way, you would be able to prevent
the need for any writing to the old drive.
If your hard drive works in a
RAID system, you need a service that specializes in RAID data recovery as it
wont be a good idea to do it on your own PCB Prototype Manufacturer.
When a hard drive is prepared for its initial use, the drive is
magnetized. This is done with a number of self-synchronizing magnetic bits. The
purpose of this self-synchronizing structure is that, no matter where the hard
disk is in its rotation cycle, the hard drive controller would be able to
speedily touch down as to which of these bits represent no-man's land, which of
these actually represent the drive's formatting, and which represent critical
data.
Various situation based examples were discussed to clarify your
queries on external data drive recovery.
So do utilize this informative
discussion sometime when you come across data problems on your external hard
drive.
Related Links